PULSAR2

intelligent mount driver

Since January 1st 2010, the well known Pulsar has evolved

to the 2nd generation level of sophisticated telescope GoTo drive systems

 

---

Pulsar2

Lees ook alle basis informatie over de Pulsar hier

The natural evolution of Pulsar is Pulsar2. From November 2009 Gemini Telescope Design is offering this new version that retains all the key features of its predecessor but adds more flexibility and ease of use.

 

What's new?

- Pulsar2 accepts servos (35vDC max) or steppers.

- Independent incremental encoders can be added.

- Connects to the PC by the USB port.

- Allows direct access from the internet (Ethernet connector).

- Has much more memory for databases (currently we have added IC and Pk).

- Steppers are driven in 2 speed dependent modes, ensuring silent and silky smooth tracking AND high goto speeds.

- The motor connector and the hand controller are compatible with Pulsar,

- It has a foolproof initializing menu to help setting DEC motor rotation and finding the reference star.

- Upgrading the firmware takes 20 seconds and all user settings in the menu are protected.

Available soon

During 2010 we will add a cone error correction routine and a polar alignment routine.

 

	Motor driver unit (10-35V input /max.24V recommended/, 2x2A max output), PC software, serial and power cable. This configuration allows LX200 based control of stepper/servo driven mounts with a planetarium program and Pulsar Commander SW (for observatory use) The PEC can be CCD programmed (by simply guiding on a star or by PemPro) and the virtual hand controller provides access to all menu features.	850,00
	Hand controller (2x16 char. red LCD, Joystick, back illuminated numeric keypad, LED flashlight, full menu control, direct menu keys, with user defined cable length (max. 500m, at EUR 2/m over 2m)	300,00
	GPS cable 2m . Provides an accurate time source, enables real time King rate and intelligent mount handling when your geographical position is unknown, that is in transportable mode.	45,00
	Accessories
	Autoguider cables for ST4, STAR2000, STV, SBIG Relay box, are supplied upon request with your purchase of Pulsar	45,00

Prices in EURO

 

Special offer

Units ordered with G-42 mount will have a free PEC encoder installation.

 

 

---

back to/terug naar de:

Pulsar startpage

Pulsar the original version

G41/42 configuration page

G41/42 main info pagina

G41/42 PEC page

Ecliptica homepage